Detail HUST ( DELTA) H4CP SERIES ( 4 Axises, General Use)
1. INTERNAL PLC.
2. Design the screen suit for any requirement and providing dynamic point function.
3. User can use 9999 variables to calculate such as Plus , Minus , Time , Divide , AND , OR and so on.
4. Motor speed has many groups of mode to set , and it can be adjusted by machine. Acceleration/ Deceleration set: 4msec^ 1sec, there are also S curve and linear to choose.
5. Standard I/ O 24 INPUT 16 OUTPUT , Enlarge I/ O to 64 IN 64 OUT.
6. 2 sets of ANALOG OUTPUT and 2 sets of ANALOG INPUT signal, providing axis control.
7. Resolution can setting to 7 orders, responsive speed up to 1000 Kpps.
8. Master/ Slave mode: Controller will adjust the speed of following axis( Slave) with the speed of the main axis( Master) and the MCM settings. At the connection of 2 sections, the speed will not be zero and changed to the required speed directly.
9. Passive ENCODER added is available. Controller can confirm the feed-length according to the feedback of passive encoder.
10. MACRO ( G65) Command.
11. 512K byte of program memory. If the program is to big, user can use the function of DNC.
12. Through RS232 interface, the controller can refresh the system data and supervisory control by PC
Tampilkan Lebih Banyak