Detail Transmitter Cerabar S PMP75
E+ H, Endress+ Hauser Pressure transmitter with metal sensor Cerabar S PMP75 Overload-resistant and function-monitored; Communication via HART, PROFIBUS PA or FOUNDATION Fieldbus Your benefits - Very good reproducibility and long-term stability - High reference accuracy: up to ± 0.075% , as PLATINUM version: ± 0.05% - Turn down 100: 1, higher on request - Used for process pressure monitoring up to SIL3, certified according to IEC 61508 by TÜ V SÜ D - HistoROM® / M-DAT memory module - Function-monitored from the measuring cell to the electronics - Continuous modularity for differential pressure, hydrostatic and pressure ( Deltabar S, Deltapilot S, Cerabar S) , e.g. - replaceable display - universal electronic - Quick commissioning thanks to quick setup menu - Menu-guided operation - Extensive diagnostic functions - Device versions in conformity with ASME-BPE E+ H, Endress+ Hauser Pressure transmitter with metal sensor Cerabar S PMP75 The Cerabar S pressure transmitter is used for the following measuring tasks: - Absolute pressure and gauge pressure in gases, steams or liquids in all areas of process engineering and process measurement technology - Level, volume or mass measurement in liquids - High process temperature - with typical diaphragm seals up to 400° C ( 752° F) - High pressure up to 700 bar - International usage thanks to a wide range of approvals
pressure transmitter
Tampilkan Lebih Banyak