Detail ( New! ) Yaskawa J1000 Series-small Type
J1000 Drive
The J1000 is a world-class compact variable frequency drive that defines a new world standard. Demands for efficient production and better maintainability are on the rise, spurred by global competition. Yaskawa drives have earned a reputation for high performance, high functionality, and high quality.
Great things come in small packages!
Specifications and Features for J1000 Drive
In our pursuit to create drives optimized for variable speed needs in compact applications, the J1000 is the solution. This micro-drive is simple andreliable with even higher quality. Demand continues to increase for a compact shaft turner with hassle-free maintenance. Yaskawa drives haveearned a reputation for high performance, high functionality, and high quality.
Performance Features
Ratings:
1/ 8 to 3 HP at 200-240 VAC 1-ph
1/ 8 to 5 HP at 200-240 VAC 3-ph
1/ 2 to 7.5 HP ( ND) at 380-480 VAC 3-ph
Overload Capacity:
150% for 60 sec. ( Heavy Duty)
120% for 60 sec. ( Normal Duty)
Control Methods: V/ f Control
DC injection braking, ramp to stop
Electronic reversing
Adjustable accel/ decel: 0.0 to 6000.0 seconds
Controlled speed range: 40: 1
Speed Regulation:
± 0.5 to 1% with slip compensation
Displacement power factor: 0.98
Output frequency: 0 to 400 Hz
Frequency resolution:
0.01 Hz with digital reference
0.06 / 60 Hz with analog reference
Frequency accuracy:
0.01% with digital command
0.5% with analog command
Volts / hertz ratio: infinitely adjustable pattern
DC Injection braking: adjustable amplitude,
duration, current limited
Torque boost: full range, auto
Power loss ride-thru: 0.5 sec.
Speed search
Auto restart
2 Critical frequency rejection settings
Slip Compensation
Protective Features
Current limit, stall prevention during
accel, decel, and run
Motor and drive overload
Over voltage prevention function
Instantaneous over current
Short circuit
Under voltage
Heatsink overheat
Ground fault protection
Over/ under torque
Short circuit current rating: 30KAIC RMS
Options
Dynamic Braking resistor ( external)
Remote LED Operator w/ copy function
Modbus 232/ 422/ 485 Communications
Analog Potentiometer Card
DriveWizardTM Plus
DIN rail mounting kit
Y-Stick Copy Unit
Design Features
16-bit microprocessor logic
Digital keypad operator, 5 digits
LED status display
Remote Mount Keypad Capability
5 multifunction digital inputs
1 multifunction digital output
Programmable form C output contact for
customer use: 1A at 250 VAC or 30 VDC
24 VDC control logic compatible with
sourcing or sinking outputs ( PNP or NPN)
Carrier frequency: 15 kHz max; swing PWM
8 multi-speed settings plus jog speed
1 Remote speed reference:
0-10 VDC ( 20 kohms) or isolated
4-20 mA ( 250 ohms)
Signal follower: bias and gain
Analog monitor output:
0-10 VDC proportional to output
frequency or output current
133 parameters
Cooling fan controlled by drive run/ stop
UL recognized electronic overload
MTBF: 28 years
Built-in Dynamic Braking Transistor
Protected Chassis
Side-by-Side mounting
Maintenance monitors
Service Conditions
Ambient service temperature:
-10° to 50° C ( + 14° to 122° F)
Ambient storage temperature:
-20° to 60° C ( -4° to 140° F)
Humidity: to 95% non-condensing
Altitude: to 3300 ft; higher by derating
Service factor: 1.0
Input voltage: -15% to + 10%
200 to 240 VAC, 380 to 480 VAC
Input frequency: + / -5% ; 50/ 60 Hz
Input phase sequence insensitive
Standards
UL 508C ( Power Conversion)
CSA 22.2 No. 14-95
( Industrial Control Equipment)
UL, cUL listed; CE marked
RoHS compliant
EN 50178 ( LVD)
EN 50081-2, EN 50082-2 ( EMC)
EN 61800-3
IEC 529, 146
FCC CFR 47 Part 15 Subpart B
( w/ External Filter)
Tampilkan Lebih Banyak